forming process的例句大全

By the research on forging and cold forming performance of electromagnetism pure iron, the rational forging process is brought forth, it is specially emphasized to avoid the red brittleness and blue brittleness forging temperature range for the electromagnetism pure iron.

通过对电磁纯铁锻造与冷成形性能的分析研究，给出了合理的锻造工艺，特别强调了要避开电磁纯铁的红脆与兰脆锻造温度区域。

The forming process of coping strategies on the decisions of president mainly and executive group secondarily.

个案国小因应策略之形成过程偏向以校长为主,团体决策为辅的策略形成模式.

The forming process for an automotive underbody cross member was simulated by the FE method.

利用有限元法模拟某汽车高强钢横梁的成形过程,通过设置拉深筋作为材料流动控制手段.

The sixth chapter comprehensively analyzes the process of forming the preparatory committee of Macan Special Administrative Region with reference to the international background, and compares this with Hong Kong.

第六章联系国际背景对澳门特区筹委会筹组特别行政区的实践过程加以综合分析并与香港进行比较。

The fine disseminated Au deposit and its ore-forming process

微细浸染型金矿床及其成矿作用

Finite Element Method Simulation on Precision Forming Process of Car Differential Gear

轿车差速器齿轮精密成形的有限元数值模拟

The hot-runner technology is an advanced & applied technology in process of forming of an injection mold.

热流道技术是注塑模具成形过程中的一项先进应用技术.

In this paper, using the method of numerical simulation, is studied the forming process of flow field structure in a stepped rocket launcher tube when a supersonic jet exhausts into the tube.

本文以数值模拟为手段，研究了超音速燃气射流喷入阶梯型火箭发射管后，管内流场结构的发展过程。

This paper introduces Mould-Temperature-Control ( MTC ) forming technology and the numerical simulation of its application in solidification process.

首先介绍了模具温控成形技术的方法和工艺. 然后具体到凝固成形,分析了其数值模拟的研究现状.

The MTC forming is significant being a new procedure in process optimization and quality control.

最后指出了模具温控成形技术是一种新的工艺优化和质量控制方法,有重要的研究意义.

Liquid Bulge Forming Process and Die Design for Differential Gear Casing of Automobiles

汽车后桥壳的液压胀形工艺及模具设计

Therefore, reasonable design of the TWB and the rational choice of the forming process parameters could not only avoid the defects like cracking and wrinkling, but also control the weld-line movement distance and improve the stamping formability of the TWBs.

拼焊板的合理设计以及成形工艺参数的合理选用能够避免折线焊缝拼焊板冲压成形过程中的起皱和拉裂等缺陷，并能控制焊缝的移动量，提高拼焊板的冲压成形性能。

In the process of TWB forming, there are many factors effect on the formability.

拼焊板成形过程中，多方面的因素对其成形性有影响。

The results show that the method can effectively resolve the TWB forming process parameters, and that the weld line movement can be reduced by more than 75%.

优化计算结果表明，该方法能有效求解拼焊板成形过程参数，使焊缝有害偏移量减少75%以上。

Development of CAI Software for "Metal Plastic Forming Process"

金属塑性加工学多媒体教学软件的开发

Gel-casting is a novel forming process of PLCT pyroelectric material combining innoxious gel-casting with PLCT pyroelectric material, and there is few report about this aspect in china.

PLCT热释电材料陶瓷凝胶注模成型是把无毒性陶瓷成型工艺与PLCT热释电材料相结合的一种新型陶瓷成型工艺，关于这方面工作国内报道甚少。

With the theoretical analysis, the computer simulation and the process experiment methods, this paper studies the liquid forming mechanism of silicon wafer for ELCC technology and makes provision for further research on the solidification microstructure control of the silicon sheet.

采用理论分析、计算机模拟与工艺实验相结合的方法，对ELCC技术硅片液态成形机制进行了研究，为进一步对硅片凝固过程组织控制的研究奠定基础。

Secondly, the process of drafting utilizing foreign capital Secondly, legalization. Effects of the second and third invariants of the stress deviator on metal forming

偏应力张量第二及第三不变量在塑性加工中的作用

On omen characteristic of thunderstorm forming process on Doppler radar VWP image

雷暴天气在多普勒雷达资料上的前兆特征分析

The article also explores the grammaticalizational process of VNN construction, explaining the forming of VNN construction in line with cognitive principles.

本文还从“名动互含”的假设出发，探讨了VNN构块式的语法化过程，并从认知原则对这一构块作了初步的解释。